Non Clog Submersible Pump

OVERVIEW

These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.

FEATURES

• Non-clog two vane or single vane enclosed impeller
• Permissible solid size up to 85 mm
• Gland packed / Mechanical seal
• 50 HZ / 60 HZ availability

APPLICATIONS

• Effluents
• Raw Sewage
• Storm Water
• Waste Water

SPECIFICATIONS

• Delivery size from 40 mm to 200 mm
• Capacity up to 750 m/hr
• Head up to 48 m
• Temperature (-) 10°C to 90°C

OVERVIEW

These pumps can withstand wide voltage fluctuations from 180-240 volts. The thermal overload protector prevents motor burning. The stainless steel shaft is used for avoiding rust problem. The locked impeller promises consistent performance. These pumps are very useful in water supply for domestic use in bungalows, apartments, hotels and hospitals. This multi-purpose pump is constructed with high quality materials for durability.

FEATURES

• Can withstand wide voltage fluctuation from 180 to 240 volts
• Self priming up to 3 metres
• Stainless steel shaft to avoid rusting problems
• Locked impeller results in consistent performance
• Aluminium extruded motor body for better heat dissipation and corrosion resistance
• TEFC capacitor start and run motor, with IP-44 protection and class 'B' insulation
• Double shielded ball bearing - no need for external lubrication
• Capacitor inside terminal box

APPLICATIONS

• Water supply for bungalows, apartments, hotels, hospitals, farmhouses etc.
• Useful for home pressure booster systems, lawn sprinklers, overhead tanks and watering gardens

SPECIFICATIONS

Technical Specifications

• Head : 6 to 24 metres
• Capacity : 2250 to 400 LPH
• Power Rating : 0.37 kW (0.5 HP)
• Voltage Range : 180 to 240 Volts

Material of Construction

• Impeller : Forged Brass
• Delivery Casing : Cast Iron
• Motor Body : Aluminium
• Mounting Casing : Cast Iron
• Shaft : Carbon Steel

OVERVIEW

These pumps can withstand voltage fluctuations from 180-255 volts. Thermal overload protector, safeguards the motor from burning. These pumps are light weight and easy to handle. Lightweight pump designed for easy handling and maintenance.

FEATURES

• Can withstand wide voltage fluctuations from 180 to 255 Volts
• Self priming with lift up to 3 metres
• Thermal Overload Protector (TOP) - prevents motor burning out
• High quality aluminium extruded motor body with chrome plated shaft
• TEFC capacitor start and run motor with IP-44 protection and class 'B' insulation
• Double shielded ball bearings - no need for external lubrication
• Lightweight pump for easy handling
• Easy maintenance and spares availability

APPLICATIONS

• Water supply for domestic use in bungalows, apartments, hotels, hospitals, farmhouses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering gardens
• Circulation of water in industries

SPECIFICATIONS

Technical Specifications

• Head : 6 to 28 metres
• Capacity : 2700 to 450 LPH
• Power Rating : 0.37 kW (0.50 HP)
• Voltage Range : 180 to 255 Volts

Material of Construction

• Impeller : Bronze
• Delivery Casing : Cast Iron
• Motor Body : Aluminium
• Mounting Casing : Cast Iron
• Shaft : Carbon Steel (Chrome Plated

OVERVIEW

These are single phase, end suction monoblocs with portability. These are noiseless pumps and available in stainless steel. These pumps have delivery size 20 mm and 25 mm. These are used in apartments, villas, booster service, hospitals and hotels. This multi-purpose, durable pump is available in both 1 and 3 phase.

FEATURES

• Can withstand wide voltage fluctuations,from 180 to 240 volts
• Self priming up to 3 metres
• Thermal Overload Protector (TOP) prevents motor burning out
• Stainless steel shaft avoids rusting problems
• Locked impeller results in consistent performance
• High quality aluminium extruded motor body
• TEFC capacitor start and run motor, with IP- 44 protection and class 'B' insulation
• Double shielded ball bearing - no need for external lubrication
• Capacitor inside terminal box
• Single phase and three phase options available

APPLICATIONS

• Water supply for bungalows, apartments, hotels, hospitals, farmhouses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering gardens

SPECIFICATIONS

Technical Specifications

• Head : 6 to 28 metres
• Capacity : 3150 to 720 LPH
• Power Rating : 0.37 kW (0.5 HP)
• Voltage Range : 180 to 240 Volts - single
• phase, and 300 to 440 Volts - three phase

Material of Construction

• Impeller : Forged Brass
• Delivery Casing : Cast Iron
• Motor Body : Cast Iron
• Fan Cover : Plastic
• Mounting Casing : Cast Iron
• Shaft : Carbon Steel
• (Chrome Plated)

OVERVIEW

These are single and three phase, end suction monobloc pumps with portability. These are noiseless pumps and available in stainless steel. High head and discharge makes this pump suitable for a wide variety of uses.

FEATURES

• Total head - 40 metres
• Self priming up to 3 metres
• Can withstand wide voltage fluctuations from 180 to 240 Volts
• Thermal Overload Protector (TOP), protects motor from burning out
• Chrome plated shaft to avoid rust problems
• Motor with IP-44 protection and class 'B' insulation
• Shielded ball bearings - no need for external lubrication
• Lightweight pump for easy handling
• Available in single and three phase options

APPLICATIONS

• Water supply for domestic use in bungalows, apartments, hotels, hospitals, farmhouses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering gardens

SPECIFICATIONS

Technical Specifications

• Head : 10 to 40 metres
• Capacity : 3000 to 200 LPH
• Power Rating : 0.75 kW (1.0 HP)
• Voltage Range : 180 to 240 Volts – single phase, and 300 to 440 Volts - three phase

Material of Construction

• Impeller : H. T. Brass
• Delivery Casing : Cast Iron
• Motor Body : Aluminium
• Shaft : Carbon Steel (Chrome Plated)

OVERVIEW

These are single and three phase, end suction monobloc pumps with portability. These are noiseless pumps and available in stainless steel. This pump features robust construction with chrome-plated shaft for rust protection and long life.

FEATURES

• Can withstand wide voltage fluctuations from 180 to 240 Volts
• Self priming up to 3 metres
• Thermal Overload Protector (TOP), protects the motor from burning out
• Chrome plated shaft to avoid rust problem
• Motor with IP-44 protection and class 'B' insulation
• Shielded ball bearings - no need for external lubrication
• Capacitor inside terminal box
• Available in single as well as three phase

APPLICATIONS

• Water supply for domestic use in bungalows, apartments, hotels, hospitals, farmhouses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering gardens

SPECIFICATIONS

Technical Specifications

• Head : 10 to 50 metres
• Capacity : 3200 to 400 LPH
• Power Rating : 0.75 kW (1.0 HP)
• Voltage Range : 180 to 240 Volts single phase, 300 to 440 Volts three phase

Material of Construction

• Impeller : H. T. Brass
• Delivery Casing : Cast Iron
• Motor Body : Cast Iron
• Shaft : Carbon Steel (Chrome Plated)

OVERVIEW

These pumps are designed for better performance in domestic applications. They have High quality aluminium extruded motor body with chrome plated shaft. These are available in single as well as three phase and can withstand wide voltage fluctuations from 180 V to 240 V. They are ideal for water supply for domestic use in Bungalows, Apartments, Hotels, Hospitals, Farm houses etc, Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering for gardens. Extra high head of 52 meters makes this pump ideal for domestic as well as institutional use.

FEATURES

• Designed for better performance in domestic applications
• Can Withstands wide voltage fluctuations from 180 V to 240 V
• High suction lift upto 7.5 m
• Thermal overload protector (TOP) prevents motor burning
• High quality aluminum extruded motor body with chrome plated shaft
• TEFC capacitor start and run motor with IP-44 protection and ‘B’ class insulation
• Capacitor inside terminal box
• Available in single as well as three phase

APPLICATIONS

• Water supply for domestic use in Bungalows, Apartments, Hotels, Hospitals, Farm houses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering for gardens
• Water circulation in small industries

SPECIFICATIONS

Technical Specifications

• Power Rating : 1.1 kW (1.5 HP)
• Head Range : 10 to 52 metres
• Discharge Range : 3960 to 360 LPH
• Voltage Range : 180 to 240 Volts - single phase, 300 to 440 Volts - three phase

Material of Construction

• Impeller : Brass
• Pump Shaft : Carbon - Steel (chrome plated)
• Delivery Casing : Cast Iron
• Mounting Casing : Cast Iron
• Motor Body : Aluminium
• Cover NDE : Cast Iron
• Mechanical Seal : Carbon Ceramic

OVERVIEW

One of the most popular pumps in the country, this lightweight pump is suitable for a variety of purposes

FEATURES

• It is capable of priming up to 3meters static suction lift without a foot valve , at rated head & discharge
• Thermal Overload Protector (TOP) for safety of Motor.
• ‘B’ class of Insulation.
• Motor can withstand with wide voltage fluctuation from 180-240Volts.
• Light weight pump for easy handling
• Capacitor inside terminal box.
• TEFC capacitor starts and run motor

APPLICATIONS

• Water supply for domestic use in Bungalows , Apartments , Hotels , Farmhouses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and
• watering for gardens.

SPECIFICATIONS

Technical Specifications

• Head : 3 - 42 m
• Capacity : 3300 - 250 lph
• Power Rating : 0.37 Kw / 0.5 HP to 0.75 Kw / 1.0 HP
• Voltage Range : 180 to 240 Volts (1Phase)

Material of Construction

• Impeller : Brass
• Pump shaft : Carbon steel
• Delivery Casing : Cast Iron
• Mounting Casing : Cast Iron
• Motor Body : Extruded Aluminum
• Cover NDE : Aluminum
• Mechanical Seal : Carbon Ceramic

OVERVIEW

This highly efficient pump which is lightweight and easy to handle is also UPS compatible.

FEATURES

• Special Motor design can work on UPS
• It is capable of priming up to 3 meters static suction lift without a foot valve , at rated head & discharge
• ‘B’ class of Insulation.
• Motor can withstand with wide voltage fluctuation from 180-240Volts.
• Light weight pump for easy handling
• Capacitor inside terminal box.
• TEFC capacitor starts and run motor

APPLICATIONS

• Water supply for domestic use in Bungalows, Apartments, Hotels, Farmhouses etc.
• Useful in home pressure booster systems, lawn sprinklers, overhead tanks and watering for gardens.

SPECIFICATIONS

Technical Specifications

• Head : 6 to 26 meters
• Capacity : 1980 to 360 LPH
• Power Rating : 0.37 Kw / 0.5 HP
• Voltage Range : 180 to 240 Volts (1Phase)

Material of Construction

• Impeller : Brass
• Pump shaft : Carbon steel
• Delivery Casing : Cast Iron
• Mounting Casing : Cast Iron
• Motor Body : Extruded Aluminum
• Cover NDE : Aluminum
• Mechanical Seal : Carbon Ceramic