Solid Handling Pump

  1. Home
  2. Pumpus
  3. Solid Handling Pump

Services

SHM Solid Handling Pumps

...

  • OVERVIEW

    SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

  • FEATURES

    • Solid size up to 105 mm
    • Back pull-out design
    • Gland packed / Mechanical Seal
    • 50 Hz / 60 Hz availability
    • Also available in vertical execution

  • APPLICATIONS

    • Sludge
    • Sewage
    • Power material slurries
    • Sugar factory waste

  • SPECIFICATIONS

    • Delivery size up to 200 mm
    • Capacity up to 800 m³/hr
    • Head up to 90 m
    • Temperature (-) 10 °C to 140 °C

SHL Solid Handling Pumps

...

  • OVERVIEW

    SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

  • FEATURES

    • Solid size up to 105 mm
    • Back pull-out design
    • Gland packed / Mechanical Seal
    • 50 Hz / 60 Hz availability
    • Also available in vertical execution

  • APPLICATIONS

    • Sludge
    • Sewage
    • Power material slurries
    • Sugar factory waste

  • SPECIFICATIONS

    • Delivery size up to 200 mm
    • Capacity up to 800 m³/hr
    • Head up to 90 m
    • Temperature (-) 10 °C to 140 °C

Romak Process Pumps

...

  • OVERVIEW

    Romak (RMK) pump is a Magnetic Drive Pump comprising Permanent magnets. It is a sealless pump and is used for handling various types of clear/ clean chemical liquids without any suspended particles in process industries.

  • FEATURES

    • Seal less and glandless pump
    • End suction pump comprises of permanent magnet

  • APPLICATIONS

    • Chemicals - Paints, solvents, intermediaries, resin, polymers, other Acidic and basic chemicals
    • Pharmaceuticals
    • Petrochemicals

  • SPECIFICATIONS

    • Delivery size : Up to 100mm
    • Capacity : Up to 300 m3/hr
    • Head : Up to 150 m
    • working pressure : 16 bar
    • Temperature : (-) 50 °C to 180 °C

i-CM Process Pumps

...

  • OVERVIEW

    Canned Motor pumps are ideal for pumping corrosive and noxious fluids that are used in chemical and process industry, refrigeration plants, paint industry and refinery & petrochemicals.

  • FEATURES

    • i-CM pump is end suction type sealless, glandless and emission-free Canned motor pump, having integral motor design due to which it is compact in construction and light in weight.
    • Sealless and glandless pump
    • Integrated motor design due to which it is compact in construction and light in weight

  • APPLICATIONS

    • Liquefied gases (e. g. ammonia, freons, carbon dioxide, amines, vinyl chloride, ethylene oxide, phosgene (>150°C), etc.
    • % Aggressive / toxic /explosive / hazardous / flammable chemicals (sulfuric acid, nitric acid, hydrofluoric acid, hydrocyanic acid, ethanoic acid, formic acid, etc.)

  • SPECIFICATIONS

    • Delivery size : 32 to 50 mm
    • Capacity : 4 to 80 m3/hr
    • Head : Up to 60 m
    • working pressure : 16 bar
    • Temperature : Up to 90 °C

AT Process Pumps

...

  • OVERVIEW

    AT pump is used in handling Thermic fluids across various applications in process industries. The pump can handle fluid upto 350°C. The design is as per standard - EN 22858.

  • FEATURES

    • The pump is integral foot mounted for given temperature range
    • More reliable for thermal isolation of volute casing
    • Balanced or Unbalanced maintenance free standard mechanical seal
    • No additional cooling required (air cooled)
    • Pump with grafoil packing at stuffing box cavity

  • APPLICATIONS

    • Thermic fluid
    • Synthetic oil
    • Hot oil

  • SPECIFICATIONS

    • Delivery size : 32 to 80 mm
    • Capacity : up to 250 m3/hr
    • Head : up to 100 meters
    • working pressure : 16-25 bar
    • Temperature : +180°C to +350°C

GK(P) Process Pumps

...

  • OVERVIEW

    These pumps are developed for process applications and are generally conforming to ISO 2858 / DIN EN 22858 / ISO 5199. These pumps are ideal for Acids / Alkalies, Hydrocarbons, oils, Various Process Chemicals, Food processing units. Delivery size up to 150 mm.

  • FEATURES

    • End suction centrifugal process pump
    • Back pull out design
    • Top centerline discharge with foot mounted as well as centerline volute casing.
    • Availability of cooling jackets to cool stuffing box for liquids having temperature more than 105 deg. cel

  • APPLICATIONS

    • Acids / Alkalies
    • Hydrocarbons, oils
    • Various Process Chemicals
    • Food processing units

  • SPECIFICATIONS

    • Delivery size : Up to 150 mm
    • Capacity : up to 500 m3/h
    • Head : up to 150 m
    • working pressure : 16-25 bar
    • Temperature : Up to 180°C